If you accidentally drop your iPhone in water, or any other liquid, you must act quickly in order to have any chance of avoiding permanent iPhone liquid damage. Speed is of the essence and if you react as fast as you can you may be lucky and save your device.
This article explains the steps you should follow that should help you avoid liquid damage crippling your iPhone completely.
Disclaimer: iChimp can not be held responsible should this article fail to help you fix your iPhone after liquid damage. If you are not confident then please call in an expert. I have a couple of recommendations in my iPhone repair article.
How to fix iPhone liquid damage
1. This is obvious, but get your iPhone out of the liquid as quickly as possible. Immediately switch your device off by pressing and holding the power button for 5 seconds. If your iPhone has switched itself off already be careful not to switch it on again.Switching your iPhone off as fast as you can is vital. Every seconds counts so get it turned off immediately and leave it off to allow it to dry out thoroughly for a few days before attempting to switch it on again.Why?Well the liquid inside the phone can cause short-circuits that blow electric parts in the phone. This is the real danger not the liquid itself.
2. Get as much of the liquid out of your phone as possible by holding it upright.
3. Dry your iPhone off carefully using a cloth. Don’t use a hairdryer or oven to try and speed the process up as the heat may damage your phone beyond repair.
4. Fill a zipper storage plastic bag with rice or silica-gel packets and put your iPhone in it so it is completely surrounded. Squeeze out all the air and seal the top.
5. Leave the iPhone in rice for at least 24 hours, but preferably 48 hours to completely absorb the moisture from the phone.
6. Before you turn your iPhone on you need to check the Liquid Contact Indicator (LCI) for circuit board damage.All iPhones have a Liquid Contact Indicator (LCI) which is activated when liquid has been in contact with the circuit board and damaged the phone.
If the iPhone was damaged by water, the indicator will turn red.If there is no water damage the indicator’s should be white or silver.To find where the LCI is located on your iPhone, check out the below table.
Still not working?
If your iPhone is still not working then you may need to have it professionally repaired.
If your iPhone is insured, either through a dedicate policy or via your home or contents insurance then you may be able to claim for a replacement. If you are in a contract then the network provider may help towards the cost of a replacement. If not, you may be out of pocket to replace your beloved iPhone.
If you want to get good quality repairs without having to pay the Apple’s premium prices then check out my article on how to repair your broken iPhone for some recommendations of who to use.
Did you find this iPhone fix helpful?
If you found this fix helpful please take a moment to tweet, like, or share this article by using the buttons at the top of this page. I’d really appreciate it. 🙂
Also, if you are feeling extra generous after having your issue solved please leave some encouraging feedback in the comments section at the bottom of the page. I love getting feedback from visitors. It encourages me to find further solutions to those awkward little iPhone, iPad, MacBook, and Mac problems that we all suffer from.
Thanks for taking the time to read my website and I hope to help you again soon!
Get my Apple iOS 10 guide FREE!
Click the link below to signup for our guide showing you how the latest version of Apple’s Operating System – iOS 10 – will work on your iPhone, iPad, iPad Mini or iPod Touch for free!
That’s right, a free user guide showing you the new features.